Pump System

PS600 BADU Top 12

article #

2921

controller

PS 600

motor

ECDRIVE 600 BADU Top

pump end (PE)

BADU Top 12
(manufacturer Speck Pumps)

source of energy
(not included in delivery)

solar generator (340-900 Wp)
battery, DC source

Pump end (PE) BADU Top 12

• monoblock-type pump with integrated strainer tank
• bellow mechanical seal is mounted on a plastic shaft protected sleeve
• motor/pump shaft has no contact with fluid
• total electric separation
• strainer capacity approx. 3 l
• strainer basket mesh size approx. 3.2 x 2.6 mm

Material used for pump end

• pump casing, strainer basket: PP
• flange, gland housing: PP TV 40
• diffuser: PP TV 40
• impeller: PA 66 GF 30 / PC
• lid: PC, transparent
• mechanical seal: carbon / ceramic / NBR
• bolts: steel, galvanized

Motor ECDRIVE 600 BADU Top

• brushless, maintenance-free DC motor

Controller PS600

• controlling of the pump system and monitoring of the operating states
• mounted at surface (no submerged electronic parts)
• two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
• automatic reset 20 minutes after well probe turns pump off
• protected against reverse polarity, overload and high temperature
• speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
• solar operation: integrated MPPT (Maximum Power Point Tracking)
• battery operation: low voltage disconnect and restart after battery has recovered
• max. efficiency 92 % (motor + controller)

PS600 BADU Top12

Solar Operation

Battery Operation

max. flow rate [m3/h]

15

13

max. lift [m]

14

13

ambient temperature [oC]

-30 to +45

Controller

PS600

input voltage

solar generator:
nominal voltage
48-72 V DC
open circuit voltage
max. 150 V DC

battery, DC source:
nominal voltage
48 V DC

type of enclosure

IP 54

dimensions (net/packing)

395 x 175 x 165 mm / 450 x 250 x 250 mm
= 0.027 m3

weight (net/gross)

4.5 kg / 5.3 kg

Motor

ECDRIVE 600 BADU Top

max. power input [W]

600

type of enclosure

IP X4

class of insulation

F

Pump End

BADU Top 12 (manufacturer Speck Pumps)

suction / max. positive inlet lift

3.0 m

max. casing pressure

2.5 bar

max. water temperature

+60 oC

Motor + Pump End

ECDRIVE 600 BADU Top + BADU Top 12

dimensions (net / packing)

see dimension drawing:
520 x 220 x 350 mm
= 0.0400 m3

weight (net / gross)

8.7 kg / 9.7 kg